Click to enlarge diagrams.

BIGMAX Outrigger Type F

Type F
Type F

Cross Beam/2 Fixed Legs

This is a simple and strong outrigger with a fixed crossbeam, two fixed legs and no lateral extensions. This outrigger is suitable for use as an auxiliary stabilizer with cranes from 2 to 31 t/m. Type F outriggers are also suitable for use with scissor lifts and similar equipment.

Type F outrigger stabilizers are most effective when equipment is centre mounted on a vehicle that is stable without lateral extensions.

Download Type F Technical Specifications Sheet PDF file

Type F full unit

Type F full unit

Note: Ratings below are for auxiliary outrigger stabilizers only. Click here for basic information required to select primary (main) stabilizers.
CRANE
ton-m
SERIES MODEL MAIN DIMENSIONS
mm
CYLINDER DIMENSIONS mm
IE IC AxB CV ØP ØE1 ØS H Peso kg J min-max K min-max
2-4 0A TD-F/S-CR 1960 1800 120x80 355 160 75 40 530 70 120-420 0-330
4-10 0 TD-F/S-CR 2160 2000 120x80 355 160 75 40 530 80 120-420 0-330
10-23 1 TD-F/S-CR 2160 2000 180x100 455 160 90 60 685 145 110-550 0-430
1 TD-F/L-CR 2160 2000 180x100 580 160 90 60 810 160 110-640 0-560
18-31 2 TD-F/C-CR 2300 2100 200x100 470 200 100 60 700 170 100-550 0-440
2 TD-F/S-CR 2300 2100 200x100 550 200 100 60 780 185 100-640 0-530
2 TD-F/L-CR 2300 2100 200x100 635 200 100 60 865 190 100-730 0-600

Leg Options

Adjustable leg

Adjustable leg

Tilt-up leg

Tilt-up leg

Non-adjustable leg

Non-adjustable leg